304L Stainless steel pipe

304L Stainless steel pipe

304L stainless steel pipe is mainly used in automobile accessories, hardware tools, tableware, cabinets, medical appliances, office equipment, weaving, handicrafts, petroleum, electronics, chemicals, textile, food, machinery, construction, nuclear power, aerospace, military and other industries.

View more

316L Stainless steel pipe

316L Stainless steel pipe

316L stainless steel pipe is commonly used in pulp and paper making equipment, heat exchanger, dyeing equipment, film processing equipment, pipes, materials used for the exterior of buildings in coastal areas, as well as watch chains and case of advanced watches.

View more

2205 stainless steel pipe

2205 stainless steel pipe

Use of 2205 stainless steel pipe: 1. The heater is generally used in the oil refining unit; 2. Chemical plant equipment pipeline; 3. Fast cooling cylinder for solid solution used in textile industry; 4. Seamless steel pipe for heat exchanger and condenser. 5. High pressure seamless steel pipe for food (gb-2000) is a high-quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipes with working temperature of - 40~400 ° C and working pressure of 10~30ma. 6. Seamless steel pipes for geological drilling and oil drilling control. 7. Cracking pipe for petrochemical industry is used to transport high-temperature and high-pressure fluid on fertilizer equipment.

View more

2507 stainless steel pipe

2507 stainless steel pipe

2507 stainless steel pipe is used in oil and natural gas industry; Offshore stone skyshatter oil platform (heat exchanger pipe, water treatment and water supply system, fire protection system, water spraying system, water stabilization system; petrochemical equipment; desalination (desalination) equipment (and high-pressure pipe and seawater pipe in the equipment). Mechanical and structural components that require both high strength and high corrosion resistance: fuel (waste) gas purification equipment.

View more

201 stainless steel pipe

201 stainless steel pipe

201 stainless steel pipe is mainly used for decorative tubes, industrial tubes and some shallow stretched products. Such as: oil waste gas combustion pipeline; Engine exhaust pipe; Boiler shell, heat exchanger and heating furnace components; Silencing parts for diesel engine; Boiler pressure vessel; Chemical transport vehicle; Expansion joint; Spiral welded pipe for gas furnace pipe and dryer, etc.

View more

304L Stainless steel plate

304L Stainless steel plate

304L stainless steel is mainly used in automobile accessories, hardware tools, tableware, cabinets, medical appliances, office equipment, weaving, handicrafts, petroleum, electronics, chemicals, textile, food, machinery, construction, nuclear power, aerospace, military and other industries.

View more

310S stainless steel pipe

310S stainless steel pipe

310S stainless steel pipe is widely used in kiln, high-temperature furnace, boiler, furnace liner high-temperature equipment, such as kiln car, boiler liner, high-temperature furnace, high-temperature furnace tube, combustion machine liner, etc. It can be used for high-temperature equipment. The product is resistant to high temperature and heat. 310s stainless steel plate has good creep strength and can work continuously under high temperature. The working temperature of 310S stainless steel is 1200 ℃, and it can work continuously at 1100 ℃. It is mainly used to manufacture high temperature exhaust pipe, high temperature furnace, high temperature furnace liner, crematory furnace and other steel grades requiring heat resistance, as well as high temperature and high temperature contact parts.

View more

904L stainless steel pipe

904L stainless steel pipe

904L stainless steel pipe  (super austenitic stainless steel) is a high alloyed austenitic stainless steel with very low carbon content. It has good corrosion resistance in dilute sulfuric acid and is specially designed for environments with severe corrosion conditions. It has high chromium content and sufficient nickel content. The addition of copper makes it have strong acid resistance, especially high resistance to chloride interstitial corrosion and stress corrosion cracking. It is not easy to appear corrosion spots and cracks. Its pitting resistance is slightly better than that of other steels. It has good processability and weldability, and can be used for pressure vessels.

View more

INCOLOY Alloy 825

INCOLOY Alloy 825

Incoloy 825 is a nickel iron chromium alloy, which is widely used in petroleum, natural gas and chemical processing industries. It has good corrosion resistance and can operate at higher temperatures than most stainless steels.

View more

Monel400 Stainless steel pipe

Monel400 Stainless steel pipe

About uses of Monel400 alloy: various heat exchange equipment, boiler feed water heaters, pipelines, containers, pumps, valves, shafts, etc. in petroleum and chemical processing, seawater desalination equipment, salt production equipment, propeller shafts, gasoline and water tanks, etc.

View more

4130 Carbon steel pipe

4130 Carbon steel pipe

The better weldability also makes 4130 Carbon Steel Pipe a popular choice in the aerospace industry, which is used to manufacture commercial and military aircraft components requiring high strength and low weight. Examples include gears, piston pins, etc. Other uses of 4130 steel include auto parts, cutting tools and drilling machines.

View more

ST42 Carbon steel pipe

ST42 Carbon steel pipe

The tensile strength of ST42 Carbon Steel Pipe shall not be less than 42kgf/mm2, which is 420MPa.ST42 Carbon Steel Pipe is a German standard seamless steel pipe, which is widely used. German standard seamless steel pipes for general purposes are rolled from ordinary carbon structural steel, low alloy structural steel or alloy structural steel, with the largest output, and are mainly used as pipes or structural parts for fluid transportation .

View more

ST37 Carbon steel pipe

ST37 Carbon steel pipe

Performance and application of material ST37: the material has good performance, that is, through cold rolling, it can obtain cold rolled strip and steel plate with thinner thickness and higher precision, with high straightness, high surface finish, clean and bright surface of cold rolled plate in Taiwan Strait, easy to be coated, various varieties, wide application, high stamping performance, non aging, and low yield point.

View more

A283 Carbon steel pipe

A283 Carbon steel pipe

A283 carbon steel pipe is widely used in buildings and engineering structures. It is used for making steel bars or building workshop frames, high-voltage transmission towers, bridges, vehicles, boilers, containers, ships, etc., and is also widely used as mechanical parts with low performance requirements.

View more

A192 Carbon steel pipe

A192 Carbon steel pipe

A192 carbon steel pipe Application: It is applicable to seamless carbon steel boiler tubes with minimum wall thickness for high pressure and steel tubes for superheaters.

View more

A214 Carbon steel pipe

A214 Carbon steel pipe

A214 carbon steel pipe: resistance welded carbon steel pipe for heat exchanger and condenser.

View more

A179 Carbon steel pipe

A179 Carbon steel pipe

A179 Purpose: It is applicable to steel pipes for tubular heat exchangers, condensers and similar heat transfer equipment. The chemical composition of the steel is as follows: Carbon: 0.06%~0.18%, Manganese: 0.27%~0.63%, Phosphorus: 0.035%, Sulfur: MAX 0.035%.

View more

A53 Carbon steel pipe

A53 Carbon steel pipe

Application: It is suitable for stress and pressure parts, as well as steam, water, gas and air pipelines for general purposes. A53 pipeline pipe belongs to American petroleum standard pipeline pipe. Pipeline pipe is used to transport oil, steam and water pumped out of the ground to oil and natural gas industrial enterprises through pipeline pipe. Pipeline pipe includes seamless pipe and welded steel pipe, with flat end, threaded end and socket end at the pipe end; The connection methods are end welding, coupling connection, socket connection, etc.

View more

A106 GRB Carbon steel pipe

A106 GRB Carbon steel pipe

A106 GrB strength grade 415MPa. ASTM A106Gr. B seamless steel pipe is a kind of low carbon steel widely used in petroleum, chemical and boiler industries. The material has good mechanical properties. Seamless steel pipe for high-temperature operation ASTM A106 GR. B, steel grade: SA106B, Specification: 1/4 ″ - 28 ″, 13.7-711.2mm Steel grade: GRAD B, Standard: ASTM A106 - American Society for Testing and Materials.

View more

X42 Carbon steel pipe

X42 Carbon steel pipe

X42 pipeline pipe is the pipeline pipe with steel grade of X42. The pipeline pipe is used to transport the oil, steam and water pumped out of the ground to the oil and natural gas industrial enterprises through the pipeline pipe. Pipeline pipe includes seamless pipe and welded steel pipe, with flat end, threaded end and socket end at the pipe end; The connection methods are welding, coupling connection, socket connection, etc.

View more

API5L Carbon steel pipe

API5L Carbon steel pipe

Main application: used for making oil and natural gas transmission pipelines. API 5L generally refers to pipeline steel plate -- API 5L pipeline steel plate. When the pipeline steel plate is processed into large-diameter pipeline steel pipe, the oil, steam and water pumped out of the ground are transported to the oil and natural gas industrial enterprises through pipeline pipes.

View more

2205 Stainless steel coil

2205 Stainless steel coil

Use of 2205 stainless steel coil: 1. The heater is generally used in the oil refining unit; 2. Chemical plant equipment pipeline; 3. Fast cooling cylinder for solid solution used in textile industry; 4. Seamless steel pipe for heat exchanger and condenser. 5. High pressure seamless steel pipe for food (gb-2000) is a high-quality carbon structural steel and alloy steel seamless steel pipe suitable for chemical equipment and pipes with working temperature of - 40~400 ° C and working pressure of 10~30ma. 6. Seamless steel pipes for geological drilling and oil drilling control. 7. Cracking pipe for petrochemical industry is used to transport high-temperature and high-pressure fluid on fertilizer equipment.

View more

2507 Stainless steel coil

2507 Stainless steel coil

2507 stainless steel coil is used in oil and natural gas industry; Offshore stone skyshatter oil platform (heat exchanger pipe, water treatment and water supply system, fire protection system, water spraying system, water stabilization system; petrochemical equipment; desalination (desalination) equipment (and high-pressure pipe and seawater pipe in the equipment). Mechanical and structural components that require both high strength and high corrosion resistance: fuel (waste) gas purification equipment.

View more

201 Stainless steel coil

201 Stainless steel coil

201 stainless steel coil is mainly used for decorative tubes, industrial tubes and some shallow stretched products. Such as: oil waste gas combustion pipeline; Engine exhaust pipe; Boiler shell, heat exchanger and heating furnace components; Silencing parts for diesel engine; Boiler pressure vessel; Chemical transport vehicle; Expansion joint; Spiral welded pipe for gas furnace pipe and dryer, etc.

View more

< 1...456...9 >
中企跨境-全域组件 制作前进入CSS配置样式

在线客服添加返回顶部

启用全局默认滚动动画 (向上滚动)

右侧在线客服样式 1,2,3 1

图片alt标题设置： STEEL

表单验证提示文本： Content cannot be empty!

循环体没有内容时： Sorry,no matching items were found.

CSS / JS 文件放置地